BMW Z3 with Italian stainless steel luggage rack attached parked on road

BMW Z3 Luggage Rack

Welcome, if you are looking for a BMW Z3 luggage rack your in the right place. We have been manufacturing and retailing luggage racks since 2008. We are the UK & EU specialists with solutions for over 150 convertibles, it's all we do. Please see out Trustpilot feedback. We ship globally from warehouses in the UK & Netherlands.

We stock four ranges of luggage rack for the BMW Z3.

  1. The Italian made Spring model range in black or stainless we are the only UK sellers of these luggage racks they fit the BMW Z3 perfectly.
  2. The innovative boot-bag luggage bag system, extra space without a rack hand made by us since 2008.
  3. Revo-Rack the worlds only clamp less rack, it attaches using vacuum cup technology no metal clamps that damage paint.
  4. We also stock classic UK made Luggage Racks that fit the BMW Z3.

 

The Spring Range of Luggage Racks for BMW Z3 :

The Spring model comes in two finishes Stainless Steel and Black.

Matt Black Model £194.95 / 199.95€ / $259.95

Stainless Steel Model £239.95 / 239.95€ / $264.95

The rack is 108x42cm in size and can fit any boot-lid between 100cm/39" & 135cm/53" in width. What's most impressive about this rack is the quality of the finish and the simple but very effective design the rack uses to attach to the boot lid. The rack has four feet that can swivel and simply clamp onto the edge of your boot-lid. The fixing points the feet attach too simply slide along the rails and like the fit are held in place with a bolt. The luggage racks feet are rubber coated to reduce the risk of any damage to your BMW Z3's boot lid. These luggage racks are designed to carry a load of 20-25kg.

burgundy bmw z3 with the hood down on a sunny day and a black luggage rack fitted
Spring black luggage rack for BMW Z3, can carry 25kg.
silver bmw z3 with a hard top fitted and a black luggage rack on the boot in the rain
Measures 108x42cm can be fitted either way around
close up of the clamp on a bmw z3 luggage rack
Rubber coated feet and rubber coated clamps protect paintwork

 

black BMW Z3 with the hood down and a stainless steel luggage rack fitted to the boot
Spring stainless steel
close up of a stainless steel luggage rack fitted to a bmw z3
Modern design
close up of a bmw z3 luggage rack showing the detail of the rack
Quality design and manufacture

 

 

Purchase the spring luggage rack for BMW Z3 here :-


Revo-Rack Luggage Rack for BMW Z3

Black Model £329.95 / 349.95€ / $379
Polished Anodised Model £389.95 / 419.95€ / $449

The Revo-Rack has been manufactured by us in the UK since 2016 it is made from 25mm T5 Aluminium & Magnesium tube and thus the frame only weighs 1.7kg. The design of this rack allows it to fit in under 90 seconds, no bolts, no brackets, no straps, no hassle & no paint damage : ever. We manufacture the rack in either a polished anodised finish which is similar to chrome, or a version that's powder coated black.

Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : It won't fly off !

The Revo-Rack uses vacuum cup technology it sits on three 115mm vacuum cups these are rated as being able to hold an 18kg load each. These can in theory hold a 54kg load. Vacuum cups are not the same as suction cups they are much much stronger and were developed in the late 1960's to hold film camera's to cars.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force.

Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching boot/trunk lid thus creating a much stronger hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

  • Rack Frame Measures 900x 420mm
  • Sits 75mm off the boot lid
  • No fiddly metal brackets to tighten
  • No metal clamps that will at some point damage paintwork
  • No 3M paint protection stickers ( great on the first use but after that ? )
  • Can be fitted with the hoop at rear or front of boot lid
  • Can carry 20kg
  • Fitted and removed in seconds without tools
  • TUV tested
blue bmw z3 with a chrome luggage rack fitted on a sunny day
Revo-Rack PA is hand polished for a deep shine whilst still retaining the lightweight properties of aluminium
black bmw z3 with a black luggage rack fitted.
Revo-Rack has no fiddly metal brackets or clamps to damage paintwork.
rear view of a black bmw z3 with a revo-rack luggage rack fitted
Vacuum cups are not suction cups, Revo-Rack has been independently tested to ISO PAS 11154 2006. The international safety standard for roof bars. There is no standard for luggage racks.
close up of a revo-rack clamp
Soft rubber cannot damage paint, unlike metal clamps. Vacuum cups are incredibly strong and easy to use.
blue bmw z8 convertible hood down next to a wooded area with a revo-rack luggage rack fitted
Revo-Racks go on sme great road trips ! ' Revo-Rack did a great job on my Z8. Its build quality and feather light weight makes it the ultimate rack. I travelled on both the Autobahn and Alps passes and did not need to pump the cups. It holds very tight, great product. thx Ufuk Turkey 7.7.18

 

Revo-Rack being TUV certified, here being subjected to a lifting force of 650 newtons, a test it passed !

 

 

Purchase the Revo-Rack luggage rack for BMW Z3 here :-


BMW Z3 Luggage Rack Evolved : Boot-bag

The innovative boot-bag also fits the BMW Z3 and has been manufactured in the UK by the boot-bag group since 2008 with over 15,000 sold worldwide. The straps simply loop around your BMW Z3's boot lid negating the need for a rack. If you buy a car luggage rack you still need to purchase a waterproof luggage bag. Boot-bag does both jobs for half the cost of a rack alone.

Advantages of this luggage rack system for BMW Z3

  • Fully Waterproof & Hand Made In The UK
  • Attaches using soft webbing so no damage to paint
  • Sits on a soft fabric non slip mat
  • 14 day no quibble money back guarantee.
  • Folds flat for easy storage, can be removed in minutes and stored inside if you stop.
  • Saves Money ; half the price of a rack and waterproof holdall/suitcase

There are two sizes in the boot-bag range :

original  - £124.95 / 144.95€ / $161.95  (shown on the silver Z3 ) - 50 Litres of additional luggage capacity  measures 70x36x20cm ( 28"x15"x8") giving 50 litres (1.75 cubic feet) of additional storage. The soft non slip mat the bag sits on is slightly bigger measuring 80x40cm.

vacation - £154.95 / 174.95€ / $194.95 - 75 ( shown on the blue & red Z3 ) Litres of additional luggage capacity, 50% larger than the boot-bag original measuring 90x40x20cm.(36"x16"x8")  The soft mat measures 90x45cm.

graphite bmw z3 with a boot-bag original luggage rack fitted
Boot-bag original 50 Litre's of extra space no luggage rack.
side view of a graphite bmw z3 with a boot-bag original luggage rack fitted
All boot-bags are 20cm high. You will lose some rear vision but no worse than a rack with a case on it.
black bmw z3 2.8 with a boot-bag vacation luggage rack fitted
Boot-bags fit all generations / models of Z3
red bmw z3 with a boot-bag vacation luggage rack fitted on a drive next to a lwn
Boot-bag vacation adds a huge 75L of extra waterproof luggage space

Purchase a boot-bag for your Z3 here  :

How boot-bags work :

boot-bag luggage rack fitting stage 1
Stage one lay out the three straps in an H shape

 

boot-bag luggage rack fitting stage 2
Stage 2 place the soft anti slip fabric matting onto clean paintwork
stage 3 of fitting a boot-bag luggage rack
Attach the 6 ends of the straps to the bag and pull tight, they just loop around the boot lid.

12 years of evolution boot-bag the details - little things are important.

All boot-bags are hand made by us in the UK
close up of a boot-bag luggage rack
boot-bags have a velcro flap over the zip to prevent water entering the bag through the zip
aerial view of a boot-bag original luggage rack
Boot-bags have a fully adjustable strap system, all points join onto circles that are welded onto the bag, no sewing as this creates holes for water ingress.
view of a boot-bag luggage rack base
boot-bags have a soft base no hooks or studs to mark paint
close up detail of the straps on a boot-bag luggage rack
The straps attach using ladder-lock fixings once pulled tight, they stay tight.
boot-bag luggage rack third brake light
We make an optional third brake light if the bag obscures it
boot-bag vacation and original luggage racks side by side
boot-bag original 50 litre bag and the larger vacation 75 litre model.
All boot-bags are supplied with this soft fabric anti slip matting to protect paint.

The Classic Rack Luggage Rack Range for BMW Z3

The classic range comes in two models with aluminium cross rails or wood :

Classic chrome wood £119.95

Classic chrome £114.95

Both racks measure 89cm x 46cm x 11cm, and can be fitted temporarily using the fitting kit supplied alternatively they can be permanently attached as all four legs and threads within.

 

green bmw z3 with the hood up and a chrome luggage rack fitted
The classic chrome luggage rack
classic wood luggage rack for bmw z3 fitted to a mx5
Classic Wood Luggage Rack ( On MX5 fits Z3 )

 

close up of the classic rack clamps
The classic rack range uses a very simple clamp mechanism on either side to secure to the boot.

 

Each leg of the classic range also has an M6 thread so it you really want you can bolt the rack to your Z3